Contact us here

The trend is moving towards more wireless solutions. Technologies like RF and Bluetooth® are predominant, and LINAK® uses and supports both. The latter also allows us to offer control software for mobile devices, so users can control their desk, comfort bed or workstation with a touch on a smartphone screen. 

All LINAK controls come with an ergonomic design and intuitive icons. They are available in both basic and advanced versions with memory functions and displays for read-out of height indication and other data.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks and logos by LINAK® is under license.

Frequently asked questions

How to clean your desk panel

Watch and learn how to easily clean your LINAK desk panel/switch in this short instruction video: How to clean it; which cleaning agents to use; and, last but not least, what you need to pay attention to.

Clean your desk panel with a soft damp cloth. Universal cleaning detergents may be used.

For disinfection of the desk panel, use a 70 percent isopropyl alcohol either as a wipe or add a small amount to a soft cloth.

Warnings
The desk panel is not a sealed unit and there are electronics inside it. If liquids or moisture enter an opening, the PCB may be damaged, and the desk panel ruined.

Therefore:

  • Avoid moisture penetrating any openings as this may damage the PCB inside the desk panel
  • Avoid spraying the cleaning agent or disinfectant directly on the desk panel as moisture may penetrate openings and damage the PCB inside the desk panel
  • Cleaning agents and disinfectants must not be highly alkaline or acidic (pH value must be 6 to 8), and they must not contain bleach or chlorine
  • Do not use hand sanitizer gel as a cleaning agent

Alkaline and acidic cleaning agents may, over time, decompose the housing. Hand sanitizer gel may deposit on the desk panel buttons. Over time, the buttons may be stuck, or they may not work properly.

Desk Panel DPG1C - How to initialize and adjust the desk

To initialize the desk, drive downwards, press and hold the tilt until movement has been performed.

To adjust the desk, tilt the panel down for driving downwards and up for driving upwards.

Desk Panel DPG1C – How to pair to an app

Press the Bluetooth® button for 2 seconds. The light strip will start to blink with a blue color. The display shows the ID of the desk.

Open your downloaded app and connect to the desk. Look for the correct ID in the list of “Desks nearby.” 

Follow the connection instructions in the app.

Desk Panel DPG1C – How to reset the Desk Panel

There are three reset possibilities:

  • Reset of memory positions
  • Reset of light strip reminder
  • Factory reset

To reset all memory positions, press and hold the “star” button for 8 seconds until the light flashes red.

To reset the light strip reminder, press and hold the “bell”-button for 8 seconds until the light flashes red.

Factory settings: 
To return to factory settings press and hold the “bell”- button and the “star”-button for 8 seconds until the light flashes red.

HC40 Advanced: How to get started

How to get started with the HC40 TWIST™ Advanced & HC40 FRAME™ Advanced

Set the time:

  1. Use the 'UP' and 'DOWN' buttons to adjust hours.
  2. Loop to minutes using 'LEFT' and 'RIGHT' arrows and set them with 'UP' and 'DOWN'.
  3. Press 'SAVE'.

Set the day:

  1. Use 'LEFT' and 'RIGHT' arrows to loop between the days.
  2. Press 'SAVE'.

The main screen is now reached. If arrows are shown in the display, you are good to go.

If not, set the bed in pairing mode by applying power to the system and press the two top buttons at the same time.

For more information about the HC40 family, please visit: www.linak.com/HC40.

HC40 Advanced: How to save favorite positions

How to save favorite positions in the HC40 TWIST™ Advanced and HC40 FRAME™ Advanced.

  1. Drive the bed to desired position.
  2. Loop to the 'SAVE FAVORITE' screen and press 'SAVE'.
  3. Choose one of the positions and press 'SELECT'.
  4. The current position is now saved and will occur in the main menu loop.

For more information about the HC40 family, please visit: www.linak.com/HC40.

Files

TECHLINE product overview

Explore the wide variety of tough and powerful TECHLINE products. Built to last, built for hard work and built for work in harsh environments.

DESKLINE product overview

If you make any kind of desk, table or counter that people work at, a height adjustable electric actuator solution is the flexible way to gain a competitive edge and improve your business.

MEDLINE & CARELINE product overview

Dive into the wide variety of innovative MEDLINE & CARELINE products that can help you improve your hospital and healthcare equipment.

HOMELINE product overview

Explore the variety of HOMELINE systems and products for both adjustable beds and recliners.

Business areas we serve

LINAK ® produces electric linear actuator solutions to create smooth movement in a variety of very different applications. From healthcare to agriculture, comfort furniture, office interior, or industrial automation.

Go explore and be inspired by the broad spectrum of business areas already serviced by LINAK.

Got a question?

- Our team is ready to assist you with technical information, starting a project and more.