Controls
)
DPB
The compact design and mounting friendliness of the DPB make it an optimum choice of desk panel for height adjustable desks where only up and down functions are required.
The raised up and down buttons shaped as arrowheads make the panel very intuitive to use.
The panel is compatible with all DESKLINE® control boxes. As an option the DPB can be mounted in a drawer, so when not in use the panel can be hidden under the desk and blend perfectly into the desk design.
Got a question?
- Our team is ready to assist you with technical information, starting a project and more.
Contact now
How to clean your desk panel
Watch and learn how to easily clean your LINAK desk panel/switch in this short instruction video: How to clean it; which cleaning agents to use; and, last but not least, what you need to pay attention to.
Clean your desk panel with a soft damp cloth. Universal cleaning detergents may be used.
For disinfection of the desk panel, use a 70 percent isopropyl alcohol either as a wipe or add a small amount to a soft cloth.
Warnings
The desk panel is not a sealed unit and there are electronics inside it. If liquids or moisture enter an opening, the PCB may be damaged, and the desk panel ruined.
Therefore:
- Avoid moisture penetrating any openings as this may damage the PCB inside the desk panel
- Avoid spraying the cleaning agent or disinfectant directly on the desk panel as moisture may penetrate openings and damage the PCB inside the desk panel
- Cleaning agents and disinfectants must not be highly alkaline or acidic (pH value must be 6 to 8), and they must not contain bleach or chlorine
- Do not use hand sanitizer gel as a cleaning agent
Alkaline and acidic cleaning agents may, over time, decompose the housing. Hand sanitizer gel may deposit on the desk panel buttons. Over time, the buttons may be stuck, or they may not work properly.
How to initialize your desk
The desk cannot drive up if it has not been initialized.
If display: error code E01, the desk must be initialized.
How to initialize:
- Press down key and drive to the lowest position. Hold the key until the desk stops completely.
- Reactivate the down key and hold the key until the desk stops completely.
Now the desk can drive up.
The desk can only drive downwards
The desk must be initialized.
Follow the procedure shown in the video.
The desk does not drive at all
Check: Is the power line connected to the control box?
Try/Solution: Try to connect a lamp or similar to the power outlet to check that the supply voltage is OK.
Check: Are all plugs mounted correctly on the control box and the leg?
Try/Solution: Check all connections.
Check: Is there any visible damage to the cables, controls, control box or legs?
Try/Solution: Damaged parts must be exchanged. Contact the company that sold you the desk.
Desk can not be raised full stroke. Always stops in same position
The system has set a new end-stop outwards.
To erase this position, the desk must be initialized again. Follow the procedure shown in the video.
