Controls
HC40 TWIST™ Standard
The Hand Control HC40 TWIST™ Standard for the operation of electric adjustable beds is designed to match the modern bedroom interior. The HC40 TWIST sets a new standard within hand control design and even a basic bed system can now be created with a well-designed hand control. It is designed for a basic bed system with back and leg adjustment up/down as well as simultaneous drive.
The HC40 TWIST fits ergonomically well in the hands of both right-handers and left-handers. Hold it and you will experience how natural and relaxed the position of your hand is when controlling the bed. Reference lines on the back and concave and convex buttons on the front ensure one-grip-reaches-all buttons and an easy orientation of the remote.
The HC40 TWIST is developed for easy customization. Customize the color or surface and create a unique offering for a specific brand or bed series.
Got a question?
- Our team is ready to assist you with technical information, starting a project and more.
Contact now
HC40 TWIST™ How to change batteries
Learn how to change batteries in the HC40 TWIST™ Hand Control for comfort beds with LINAK systems.
- Open the battery lid by sliding the battery lid downwards.
- You will feel it loosen and the lid can easily be removed.
- You can now exchange the two AAA batteries.
- Reattach by placing the battery lid a little below the screen and slide it upwards to fasten it.
For more information about the HC40 family, please visit: www.linak.com/HC40
How to pair wireless hand controls to a LA18 IC system for comfort beds
Learn how to pair wireless hand controls to the LINAK® single actuator LA18 IC system for comfort beds using Bluetooth® technology.
- Connect the system to a power outlet
- Pairing mode has started when the Under Bed Light starts flashing. It will run for 3 minutes
- Press the top two buttons to pair the hand control
- A long flash means successful pairing
- The system is paired and ready for use
- The system will continue to be in pairing mode until the previously mentioned 3 minutes elapse. Then the light will turn green continuously to show that the system is no longer in pairing mode
Buy a new LINAK hand control for an adjustable bed
If you need a new hand control for your adjustable bed, you need to contact the supplier from whom you purchased the bed.
This applies both in cases where you have lost your hand control, the hand control is broken as well as in cases where the battery has run out of power and the battery cannot be exchanged. The supplier will assist you in ordering a new hand control - LINAK does not sell spare parts directly to the person who owns the bed.
The LINAK hand control for an adjustable bed does not work
The LINAK hand control for an adjustable bed does not work
If you experience problems with the hand control for your adjustable bed, you need to contact the supplier from whom you purchased the bed.
LINAK does not sell spare parts directly to the person who owns the bed.
Pairing hand controls to the CBH Advanced system with a Bluetooth® Adapter
How to pair hand controls to a system with a CBH Advanced and a Bluetooth® Adapter
- Connect to a power outlet
- Bluetooth® Adapter flashes for 3 minutes to indicate pairing mode
- To pair a hand control, press the two top buttons while the adapter is flashing
- A long flash indicates successful pairing
- All LINAK hand controls are paired by pressing the two top buttons
How to pair a hand control later
- Start pairing mode again
- Unplug from the power outlet and wait 10 seconds
- Connect to a power outlet
- Bluetooth® Adapter flashes for 3 minutes to indicate pairing mode
- Repeat pairing procedure on the other hand control
- The system is now paired and ready to use
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks and logos by LINAK® is under license.
