CAL40
CAL40 and CAL40+ for maximum project flexibility. The LIFT40 control box program is available in two versions: the fully featured, three channel CAL40+ and entry level CAL40, which has a maximum of two channels. Both control boxes are part of the LIFT40 product series specially developed for patient lifts. The series consists of a control box CAL40+ or CAL40, a battery BAL40, and an external charger CHL40.- Modern design that stands out
- IP Rating - IPX6
- Bluetooth for wireless operation and data exchange
CAL40
CAL40+ and CAL40 – a choice of levels
The CAL40+ and CAL40 control boxes are ergonomically designed with carers in mind, with streamlined looks and practical, easy-to-use interfaces that simply make life less complicated. Both control boxes meet the patient’s need for a safe and comfortable lift.
Ergonomic design that stands out
The CAL40+ and CAL40 are housed in a modern and intuitive ergonomic package for fast and easy battery exchange. An updated design with a clean white surface reduces visual noise, making it easy to integrate LIFT40™ into your next patient lift design.
Next generation washability
To aid our common fight against bacteria, it’s important that patient lifts can survive more aggressive washing conditions. With the IPX6 standard of CAL40 and 40+’s , the LIFT40™ system is water-spray and wipe-down resistant.
Digitally enabled CAL40+
The fully featured CAL40+ allows you to take advantage of tomorrow’s communication opportunities, with optional wireless control, and Bluetooth® for upcoming capabilities like usage and service data.
Onsite programming
Get on-site, instant programming for special solutions with SoftCon2 OpenBus protocol.
3 channel flexibility with CAL40+
Equipped with 3 channels, the CAL40 gives you fingertip control over up to three independent actuators, to give maximum flexibility for positioning and lifting.
Entry level CAL40 with fewer channels
When your design needs straightforward control, the CAL40 is the right choice, with a maximum of 2 channels it is ideal for entry-level lift designs.
Easy-to-replace battery
BAL40 makes changing lead acid batteries simple and efficient. After lifting the easily accessible handle, it’s simple to lift the battery from its holder and conveniently carry it to its charging station.
Internal battery charger
CAL40+ and CAL40 are available with internal charger and without internal charger. The internal SMPS charger makes the battery charging very efficient. Typically, the BAL40 charging time is approx. 4-5 hours from fully discharged state.
CAL40+ Functionality
The CAL40+ control box gives the possibility to
- Customize software by use of Softcon2
- Choose a plug and play solution based on LINAK standard or customized configurations
Highlights at a glance
- Modern design that stands out, while fitting in with your design
- IPX6 standard, the LIFT40 system is water spray and wipe down resistant
- Cable management for function and appearance
- Redundant control
- Emergency stop designed for easy access and to avoid unintended activation
CAL40+ only
- Bluetooth® data exchange for tomorrow’s communication opportunities
- Service and overload indicator for maintenance and safety
- SoftCon2-ready for on-location software customization
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc. and any use of such marks and logos by LINAK® is under license.
CHL40
Control boxes
CHL40 – flexible charging. The CHL40 charger is an important part of the LIFT40 product series specially developed for patient lifts. The series consists of a control box, CAL40+ or CAL40, a battery BAL40 and this external charger, the CHL40.
- For placement on wall or any flat surface
- Very visible charging indicators
- Use together with CH01 wall plug charger
BAL50 battery pack
Control boxes
The BAL50 is a next generation Li-Ion battery offering high performance and improved return on investment due to its long lifetime. The BAL50 Li-Ion battery pack is part of the LIFT50™ product series, specially developed for patient lifts. The series consists of a COL50 control box, a BAL50 battery and a CHL50 external charger. Combined with one or more actuators and a hand control, you have a complete system for modern patient lifts and sit-to-stand lifts.
- 2.9 Ah Li-Ion battery
- Lightweight ergonomic design
- IPX6 Washable
COL50 MK2
Control boxes
Take control to the next level. The COL50 is a 3-channel control box in a streamlined modern design that will raise the profile of your next lift project. The COL50 is part of the LIFT50™ product series, specially developed for mobile applications where the product is used in wet zones. The series consists of a control box, COL50, a battery BAL50 and an external charger CHL50.
- Streamlined modern design
- Turbo boost
- Bluetooth for wireless operation and data exchange
BAL40 battery pack
Control boxes
The BAL40 is a lead acid battery pack specially developed for easy handling and carrying. The BAL40 is part of the LIFT40 product series designed for patient lifts. The series consists of a control box CAL40 or CAL40+, a battery BAL40, with internal charger or an external charging set comprising the CHL40 cradle and an external charger
- 2.9 Ah lead acid battery
- Easy and intuitive to use
- IP Ratings - IPX4 or IPX6
CHL50 charger
Control boxes
Flexible charging for LIFT50. The CHL50 charger is an important part of the LIFT50 product series specially developed for patient lifts. The series consists of a control box, COL50, a battery BAL50 and this external charger, the CHL50.
- For placement on wall or any flat surface
- Very visible charging indicators
- Ergonomic battery handling
