Controls

HC30 wireless

The HC30BL is a wireless handset for advanced LINAK dual actuator systems, like the TD4 Advanced. Operates via Bluetooth® and comes with backlit buttons and a flashlight function.

Product description

HC30 wireless

The wireless hand control HC30BL is designed for use with LINAK TWINDRIVE® or CBH Advanced systems with the Bluetooth® Adapter for use in leisure beds. The hand control is based on Bluetooth® Low Energy Technology.

It has a contemporary design that matches the trend within interior design. The HC30BL combines ergonomic design and functionality in a user-friendly hand control without an annoying cable. As standard, the HC30BL offers memory, backlit buttons for extra user-friendliness, an Under-Bed Light and a flashlight function.

Product data sheet

HC30 Wireless data sheet

View the data sheet as an online magazine or download the PDF.

Brochures & manuals

TWINDRIVE TD4 Advanced user manual

This user manual will tell you how to install, use and maintain your LINAK TWINDRIVE products.

TWINDRIVE TD32 TD33 user manual

This user manual will tell you how to install, use, and maintain your LINAK TWINDRIVE products.

TWINDRIVE TD4 wireless is the new standard

Explore the TD4, specially developed for comfort beds with a moderate need for power.

Expanding your comfort zone

When it comes to leisure beds, LINAK understands the need for safe and reliable actuator systems that work day after day. The TWINDRIVE system is the right system for bed manufacturers.

Single actuator systems for leisure beds

Learn more about CBH single actuator systems with a high lifting capacity that ensures maximum flexibility for box spring manufacturers.

HOMELINE accessories

HOMELINE accessories set your bed apart with unique value-adding features. Features ensuring comfort and value for the end-user.

TD4 quick guide - Pairing devices and mechanical lowering

Learn how it only takes a few steps to pair devices to the dual actuator TD4 using Bluetooth® technology or mechanically lower a comfort bed with TD4 in case of power shortages.

Support

Assembling a single actuator system

How to assemble a single actuator system

The system consists of:
Single actuator(s)
1 x Switch Mode Power Supply
1 x CBH Advanced
1 x Bluetooth® hand control
1 x Bluetooth® Adapter

  1. Connect single actuators in channels 1-2 to control adjustment of, for example, backrest and leg support. (With the 3-ch CBH Advanced, the 3rd channel can also be used for an actuator)
  2. Plug the DC cable into the CBH Advanced
  3. Plug the Bluetooth® Adapter into the CBH Advanced
  4. Connect to a power outlet
  5. Pair the hand control (press the two top buttons simultaneously)
  6. The system is now ready for setup

Create a system with the TD4 Advanced and the CBH Advanced combined

How to connect a system with the TD4 Advanced and the CBH Advanced

The system consists of:
1 x TD4 Advanced
1 x Switch Mode Power Supply
1 x CBH Advanced
1 x 2-poled DC cable
1 x Serial cable
1 x Bluetooth® hand control
Single actuator(s)
2 x screws

  1. Place the CBH Advanced onto the TD4 Advanced & use two screws to fasten it
  2. Plug the serial cable into the TD4 Advanced and channel A1 on the CBH Advanced
  3. Plug a 2-pole DC cable into the TD4 Advanced and channel DC on the CBH Advanced
  4. Connect the SMPS to the TD4 Advanced
  5. Connect single actuators in channels 1 and 2 for adjustment of, for example, the neck rest and foot rest.
  6. If needed, connect massage motors in channels 3A and 3B
  7. Connect to a power outlet
  8. Pair the hand control (press the two top buttons simultaneously)
  9. The system is now ready for setup

How to store memory on a hand control

How to store memory on a hand control

  1. Adjust the bed to a preferred position
  2. Press S and then choose the number on which you want to store the position
  3. Now the position is stored
  4. When you want to return to this position later, simply press and hold the button on which you stored the position

Initializing a single actuator system

How to initialize a single actuator system

  1. Connect to a power outlet
  2. Actuators must be in the inner position
  3. Push the "down" button of the actuator on the hand control for approx. 5 seconds
  4. The actuator now initiates and can drive outwards
  5. Repeat this for each actuator by pressing the matching "down" button on the hand control
  6. The actuator system is now initialized

Buy a new LINAK hand control for an adjustable bed

If you need a new hand control for your adjustable bed, you need to contact the supplier from whom you purchased the bed. 
This applies both in cases where you have lost your hand control, the hand control is broken as well as in cases where the battery has run out of power and the battery cannot be exchanged. The supplier will assist you in ordering a new hand control - LINAK does not sell spare parts directly to the person who owns the bed.

The LINAK hand control for an adjustable bed does not work

The LINAK hand control for an adjustable bed does not work

If you experience problems with the hand control for your adjustable bed, you need to contact the supplier from whom you purchased the bed. 
LINAK does not sell spare parts directly to the person who owns the bed.

Pairing hand controls to the CBH Advanced system with a Bluetooth® Adapter

How to pair hand controls to a system with a CBH Advanced and a Bluetooth® Adapter

  1. Connect to a power outlet  
  2. Bluetooth® Adapter flashes for 3 minutes to indicate pairing mode
  3. To pair a hand control, press the two top buttons while the adapter is flashing
  4. A long flash indicates successful pairing
  5. All LINAK hand controls are paired by pressing the two top buttons

How to pair a hand control later

  1. Start pairing mode again
  2. Unplug from the power outlet and wait 10 seconds
  3. Connect to a power outlet
  4. Bluetooth® Adapter flashes for 3 minutes to indicate pairing mode
  5. Repeat pairing procedure on the other hand control
  6. The system is now paired and ready to use
 

Parallel drive with the TD4 Advanced

How to connect a TD4 Advanced system and use parallel drive

The system consists of:
2 x TD4 Advanced
2 x Switch Mode Power Supply
1 x Serial cable
1 x Bluetooth® hand control 

  1. Connect 2 x SMPS to the 2 x TD4 Advanced
  2. Use one serial cable to connect the two TD4 Advanced
  3. Connect both actuators to a power outlet
  4. Pair the hand control
  5. The TD4 system will now run in parallel when using the hand control

TD4 - How to set up a Bluetooth handset

  1. Set the TD4 in pairing mode by connecting it to a power outlet.
  2. The product is now in pairing mode. The Under Bed Light will blink to indicate this.
  3. Take the Bluetooth hand control and press the Back “Up” and “Down” buttons at the same time. Now the light will display a long blink and indicate that the control and the actuator are paired up.
 

Have a question about electric actuator technology?

- We are not psychics. But, we are experts in actuator technology. So do not hesitate to ask us anything about that.