select
Hand Control HB20RF

Hand Control HB20RF

The HB20 series is a handset family especially developed for the comfort furniture segment. The handset series is compatible with the TWINDRIVE® TD1, TD2 and TD3 series.

The HB20 series combines ergonomic design with a wide range of functionalities such as memory, radio frequency based (RF) communication, control for massage, switch light on and off, a child lock function and many more.


The HB20 series is a handset family especially developed for the comfort furniture segment.

The handset series is compatible with the TWINDRIVE® TD1 and TD3 series and CBH Advanced systems.

The HB20 series combines ergonomic design with a wide range of functionality including memory, radio frequency based (RF) communication, control for massage, switch light on and off and child lock function.

hand control hb20rf

View the data sheet as an online magazine or download the PDF.

 

handset for twindrive massage
systems

View the data sheet as an online magazine or download the PDF.

 

TWINDRIVE®TD1 280 (Microprocessor)
user manual

This User Manual will tell you how to install, use, and maintain your LINAK TWINDRIVE® products.

 

 

TWINDRIVE®TD32/TD33 user manual 

This User Manual will tell you how to install, use, and maintain your LINAK TWINDRIVE® products.

 

TWINDRIVE TD1 220/250
user manual

 This User Manual will tell you how to install, use, and maintain your LINAK TWINDRIVE® products.

 

 

Expanding your comfort zone

When it comes to leisure beds LINAK understands the need for safe and reliable actuators systems that work day after day. The TWINDRIVE system is the right system for bed manufacturers.

 

HOMELINE accessories

HOMELINE accessories set your bed apart with unique value adding features. Features ensuring comfort and value for the end-user.

Online Magazine | PDF

Select Your Product:

TD1 Dual Actuator TD3 Dual Actuator

TroubleShooting TD1

  1. The bed does not work at all
  2. My RF handset does not work
  3. My neck function does not recall correct memory function
  4. How to use the TD1 cable relief

The bed does not work at all



Check:
Is the main power supply connected to the TWINDRIVE TD1?

Try/Solution:
Try to connect a lamp or similar to the main power supply to check that the supply voltage is OK.

Check:
Are all plugs mounted correctly in the TWINDRIVE TD1?

Try/Solution:
Check all connections.

Check:
Is there any visible damage to the cables?

Try/Solution:
Damaged parts must be exchanged – contact the company where you bougth your bed.

My RF handset does not work


  • The handset needs to be set up with the TWINDRIVE TD1 280 (memory) underneath the bed. Follow the instruction shown in the video or in the text below.


TD1RF 280 (with memory) - How to set up radio frequency handsets

How to set up RF handsets

1. Activate the reset key on the RFR box attached on the TD1
2. Keep the reset key activated while pressing a random button on the handset
3. If there are more handsets, keep the reset key activated and press a random button on the other handset
Your bed is now ready for use.

- Download above video: TD1RF 280 (with memory) - How to set up radio frequency handsets (28Mb .wmv-file)

Back to top.

My neck function does not recall correct memory function


  • The actuator adjusting the neck function needs to be initialized. Follow the instruction shown in the video or in the text below.

TD1RF (with memory) and LA27 – How to initialize the motor system



 How to initialize the system:
  1. Move the LA27 to the outer position (without interruption until it stops)
  2. Release the button
  3. Move the LA27 to the inner position (without interruption until it stops)
  4. Release the button
The system has now been initialized.

- Download above video: TD1RF (with memory) and LA27 - How to initialize the motor system (42mb .wmv file)

Back to top.

TD1 cable relief


By using the cable relief you avoid that the cable plug is pulled out of the TD1 which may lead to a malfunction or damage the plug.

How to use the cable relief – see video.


- Download above video: TD1 cable relief (17mb .wmv file)

Back to top

TroubleShooting TD3

  1. The bed does not work at all
  2. My RF handset does not work
  3. The neck function of the bed does not work, it cannot drive outwards

The bed does not work at all



Check:
Is the main power supply connected to the TWINDRIVE TD3?

Try/Solution:
Try to connect a lamp or similar to the main power supply to check that the supply voltage is OK.

Check:
Are all plugs mounted correctly in the TWINDRIVE TD3?

Try/Solution:
Check all connections. Use the cable relief on the TD3 to assure that the cable does not fall out. Follow the instruction shown in the video or in the text below.


TD3 cable relief


By using the cable relief you avoid that the mains cable plug is pulled out of the TD3 and a malfunction occurs.
How to use the cable relief – see video.

Check:
Is there any visible damage to the cables?

Try/Solution:
Damaged parts must be exchanged – contact the company where you bought your bed.

- Download above video: TD3 cable relief (14Mb .wmv-file)

Back to top.

My RF handset does not work


  • The handset needs to be set up to the TWINDRIVE TD3 underneath the bed. Follow the instruction shown in the video or in the text below.

TD3 - How to set up radio frequency handsets

How to set up RF handsets:
  1. Activate the reset key on the TD3. The bed drives to a flat position. Keep the key pressed until the motor stops completely
  2. Release the reset key
  3. Reactivate the reset key on the TD3
  4. Keep the reset key activated while pressing a random button on the handset
  5. If there are more handsets, keep the reset key activated and press a random button on the other handset

Your bed is now ready for use.

- Download above video: TD3 - How to set up radio frequency handsets (31Mb .wmv-file)

Back to top.

The neck function of the bed does not work, it cannot drive outwards


  • The actuator adjusting the neck function needs to be initialized. Follow the instruction shown in the video or in the text below.

TD3 and LA27 - How to initialize the motor system



How to initialize the system:
  1. Push the down button on the actuator
  2. Move the actuator until it has reached the inner position and stops completely
  3. Release the key on the handset
  4. Push the down button of the actuator and keep it activated for approx. 5 sec.
  5. You can now move the actuator outwards
The system has now been initialized.

- Download above video: TD3 and LA27 - How to initialize the motor system (37mb .wmv file)

Back to top.

For further information please see the HOMELINE User Manuals.

What is a Control
The control is a unit used to control the movements of a LINAK actuator system…
HOMELINE Applications
See examples of HOMELINE applications.
Contact LINAK
Need assistance finding the product that fits your specific requirements?